Product line

	Abrasive Cut-off machine　(Specimen, production and process line)
	■Precision abrasive cut-off machine
	Wet abrasive cut-off machine Cut-off machine suitable to various type of materials from soft to hard and sizes from small to big. We also do our selves design and manufacture to integrate the machine into production line as high speed cut-off machine. 　※Send your specimen to us for test cutting!! Dry abrasive cut-off machine Suitable for precision cutting to special hardened material. You can get very fine cutting surface free from burning.
	*Model*	SD	Automatic wet abrasive cut-off machine
			Suitable for precision cutting to various type of materials specimen. Also special version to cut plural pipes at once in parallel is available. You can enjoy efficient cutting work. You can select suitable cutting wheel to each material from alumina to diamond. Cutting wheel size：　SD3:〜φ255　SD5:〜φ305

	*Model*	ST	Automatic wet abrasive cut-off machine
			Suitable for precision cutting to various type of materials specimen. Various new technologies, such as shaft drive, big size cutting wheel, high power motor are applied. Especially chop cutting in swinging mode enables cutting of big and complicated shape of heat treated hard alloy without any burn on the cutting surface. Cutting wheel size:　〜φ510

	*Model*	SH	Automatic dry abrasive cut-off machine
			>>Go to preparation machine
	*Model*	*SKE*	Automatic dry abrasive cut-off machine
			>>Go to preparation machine
	*Model*	*SR1*	Desktop Precision Cut-Off Machine
			>>Go to preparation machine
	■Circler saw　cutting
	*Model*	*UE1*	Carbide Circler saw slide cut-off machine
			Exclusively designed for thin steel pipes. In order to cut plural pipes at same time, bottom slide cutting method is applied. Main specification Round/square size 20mm〜 (cutting capacity may varies according to thickness) Option Automatic feeding and sizing system

	*Model*	*USC*	Carbide Circler saw cut-off machine
			Cut-off machine with carbide circler saw far steel. You can set easily the cutting conditions from touch panel. Main specification Bar pipe length　2〜6m (cutting capacity may varies according to thickness) Option Automatic feeding and sizing system

	*Model*	*UST*	Aluminum Bar/Pipe Cut-off Machine
			This is a Carbide chips circular cut saw cut-off machine for cutting aluminum bar and pipes exclusively. Full closed cover avoids spreading the floating aluminum cut chips out of the machine and keeps the environment clean. Technical Data: Bar: φ30〜60mm Pipe: φ30〜170 × t3〜5 Length: 3000mm Material: Aluminums Alloy Option Automatic cutting material feeder, Constant length feeder, Dust collector etc.

	*Model*	UA	Carrying-In table
			This is automatic feeder of pipes and bars. After setting the cutting materials on the table stocker then it feeds l one by one with the signal sent from the machine controller.
Copyright© 2007 Stec Co., Ltd. All Rights Reserved